![]() It's like an Arduino Pro Mini with more pins and USB tossed in.Īdafruit Pro Trinket - 5V 16MHz combines everything you love about Trinket with the familiarity of the core Arduino chip, the ATmega328. Pins 2 and 7 are not available (they are exclusively for USB). Adafruit Pro Trinket - 5V 16MHz designed for projects in which users need more pins, more flash and more RAM. It has 18 GPIO, 2 extra analog inputs, 28K flash and 2K of RAM. To upload to your Gemma or Trinket: 1) Select the proper board from the Tools->Board Menu 2) Select USBtinyISP from the Tools->Programmer 3) Plug in the Gemma/Trinket, make sure you see the green LED lit 4) For windows, install the USBtiny drivers 5) Press the button on the Gemma/Trinket - verify you see the red LED pulse. Like the Trinket, Adafruit Pro Trinket - 5V 16MHz has onboard USB bootloading support and a MicroUSB jack. It also has Optiboot support, so you can either program your Adafruit Pro Trinket - 5V 16MHz over USB or with a FTDI cable just like the Pro Mini and friends.Īdafruit Pro Trinket - 5V 16MHz uses the Atmega328P chip, which is the same core chip in the Arduino UNO/Duemilanove/Mini/etc. However, it uses 3V logic and 16MHz clock which means it's good when you want a lower-power and lower-voltage setup. ![]() ![]() Pins #2 and #7 are not available (they are exclusively for USB).Here are some things you may have to consider when adapting Arduino sketches: Adafruit Pro Trinket - 5V 16MHz is programmable using the Arduino IDE as you already set up, and 95% of Arduino projects will work out of the box! ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |